STM32F405 simulation: Adafruit Feather Express
Run STM32F405 firmware in Sim86. Open a working project and automate GPIO tests with an ELF.
This board from adafruit which is opensource and based on the single core STM32F405 chip.
Run firmware on this board
Section titled “Run firmware on this board”Open the STM32 interrupt example to inspect firmware, a button input, and LCD output. For a complete build and pass/fail test, use the STM32 firmware CI guide.
Need a specific peripheral or behavior for your firmware? Contact us to discuss your requirements.
Datasheet
Section titled “Datasheet”You can grab and take a look at the board’s datasheet and schematics, you can also check eagle cad files for the circuit and pcb design on github which are extracted from the datasheet.
STM32F405 Chip
Section titled “STM32F405 Chip”Detailed specification for the chip itself could be found on its datasheet